Version 4
Multiflex Australia supplies Version 4 series push pull cables, also referred to as 40 Series control cables and equivalent to the Morse 41-45 range across the C, B and BC variants. These cables are available with clamp hubs, bulkhead hubs, or a combination of the two at each end, so you can match the cable to your exact hub configuration.
- Clamp hubs (both ends) — equivalent to Morse 41C-45C, suiting applications where a clamp hub is required at each end.
- Bulkhead hubs (both ends) — equivalent to Morse 41B-45B, suiting applications where a bulkhead hub is required at each end.
- Bulkhead and clamp hub combination — equivalent to Morse 41BC-45BC, suiting applications where one clamp hub and one bulkhead hub are required.
Standard Version 4 cables use plated steel hubs, with stainless steel hubs available as an option. Each cable features a flat wrap stainless steel inner core and an HDPE outer conduit for smooth, consistent operation. Cable travel is available in 1", 2", 3", 4" and 5" options, with a standard 1/4-28 UNF rod size (6mm rods also available).
As with our full cable range, Version 4 cables are measured overall and manufactured to suit your application, with full specifications available in the downloadable fact sheet.
)
Version 4 Series Push Pull Cables (405)
)
Version 4 Series Push Pull Cables (401)
)
Version 4 Series Push Pull Cables (403)
)
)
)
 "Remote Valve Control Cables Explained: Reliable OEM Replacement Solutions for Industrial Valve Systems")
 "BM Shifter Replacement Cables – Reliable Performance for B&M-Style Shifters")
 "Ball Joints Explained: The Small Component That Plays a Big Role in Industrial Control Systems")
