Version 6
Multiflex Australia supplies Version 6 series push pull cables, also referred to as 60 Series control cables and equivalent to the Morse 61-65 range across the C, B and BC variants. As the heavier-duty option in our push pull cable range, Version 6 cables are available with clamp hubs, bulkhead hubs, or a combination of the two at each end, so you can match the cable to your exact hub configuration.
- Clamp hubs (both ends) — equivalent to Morse 61C-65C, suiting applications where a clamp hub is required at each end.
- Bulkhead hubs (both ends) — equivalent to Morse 61B-65B, suiting applications where a bulkhead hub is required at each end.
- Bulkhead and clamp hub combination — equivalent to Morse 61BC-65BC, suiting applications where one clamp hub and one bulkhead hub are required.
Standard Version 6 cables use plated steel hubs, with stainless steel hubs available as an option. Each cable features a flat wrap stainless steel inner core and an HDPE outer conduit for smooth, consistent operation. Cable travel is available in 2", 3", 4", 5" and 6" options, giving extra reach for heavier-duty applications, with a standard 5/16"-24 UNF rod size (8mm rods also available).
As with our full cable range, Version 6 cables are measured overall and manufactured to suit your application, with full specifications available in the downloadable fact sheet.
)
Version 6 Series Push Pull Cables (601)
)
Version 6 Series Push Pull Cables (603)
)
Version 6 Series Push Pull Cables (605)
)
)
)
 "Remote Valve Control Cables Explained: Reliable OEM Replacement Solutions for Industrial Valve Systems")
 "BM Shifter Replacement Cables – Reliable Performance for B&M-Style Shifters")
 "Ball Joints Explained: The Small Component That Plays a Big Role in Industrial Control Systems")
